bros. & Spindler Barnhart.

Book of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 online

. (page 57 of 71)
Online Librarybros. & Spindler BarnhartBook of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 → online text (page 57 of 71)
Font size
QR-code for this ebook


ner, exactly type high, perfectly square and true. The side
lock-up screw is attached to the side stick with a collar in such
a manner so as to enable the operator to lock up and unlock the
form with the wrench, moving the side stick backward and for-
ward instantly, thus saving much time and avoiding the use of
shooting stick and mallet, and consequent injury to the side
stick.

6-column $36.00

7-column 38.00

8-column 40.00

9-column : 42.00

Blank column 3.50

Lock-up Wrenches for Stereotype chases 2.00




CAST IRON SPIDER CHASES



For Job Presses



These chases are invaluable for locking up small forms; they require but little furniture and forms
do not spring as in the case when locked up in a large chase. In ordering give outside measure.




For 8
" 9

" 10
" 12
" 13
" 14



x 12 press, inside chase 5
x!2 "

" " 6

" 7
" " 8



x!5
x!8
x!9
x20



14^x22



x 7 inches $2.00

8 " 2.25

xlO " 2.50

xll " 2.75

x!2 " 3.00

8>xl2^ " 3.25

9 x!3 " . 3.50



BARNHART BROS. & SPINDLER'S



906



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



CAST-IRON CHASES, FINISHED INSIDE



$1.20


12x14 out.


80


12x18


1.00


12x26


1.30


12x30


1.40


14x16


1.60


14x18


1.20


15x24


1.50


16x19


. 1.75


17x22



12x14 outside measure $1.20

1.40

1.80

' 1.90

1.40

. 1.75

2.00

1.90

. 1.75



CAST-IRON ELECTROTYPE CHASES

14 x 18 outside, made of % x 2 inch iron ................................................................... $2.00

16x22 " " " %x2 " ' ................................................................... 2.25



CHASES FOR C & P. GORDON PRESSES



7x11 $1.00

8x12 1.25

10x15... . 1.50



$1.50
1.90
2.25



$2.70
3.00
4.50



$4.00
4.50
6.75



12 x!8 $2.00

14 x20 2.50

14>x22 3.00



$3.00
3.75
4.50



Above prices apply to most other Gordon presses.



CAST-IRON CHASES FOR PEERLESS PRESSES



$5.25 $8.00
5.75 8.50

6.00 9.00



8x12 $1.25

9 x 13 1 .50

10x15 . 1.50



11 x 17 $2.00

14 x 20 2.50

14^x22 3.00



CHASES FOR GALLY AND OTHER UNIVERSAL PRESSES



8 x 12 $1 .75

10x15 . 2.00



13x19 $2.25

14 x 22 . . . 2.75



IRON SIDE AND FOOT STICKS



Straight'Iron Side and Foot Sticks, size % x % inches, per inch $0.04

Beveled " " " " " " 0.05

In ordering be careful to state whether straight or beveled side and foot sticks are wanted.

FORM TRUCKS

The use of a Form Truck should be insisted on in every press-room of any size, not
only because it is a time-saver, but because sliding chases along the floor is a source
of frequent accidents.

Form Truck, with iron tire $2.50

Form Truck, with rubber tire 3.50

COMPOSING RULES






Set of Composing- Rules in Leather Case Set of Composing Rules in Plush Lined Oak Box

Set of.Composing Rules in a Plush Lined Oak Box $3.50

Set of'Composing Rules in a Leather Case 1.50

Steel, 15 ems and under, each 15

Steel, make-up, 15 ems and under, each 15

Each additional 5 ems or fraction, 5 cents



POINT-LINE, POINT-SET, POINT-BODY



907



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS




CIRCULAR QUADS

Per font of 8 sets , . . $3.50



YANKEE JOB AND COMMON SCREW STICK




6-inch

8-inch

10-inch

13-inch




.$0.75 I 14-inch $1.30

. .80 16-inch 1.45

. 1.00 18-inch 1.60

. 1.15 20-inch .. .1.75



THE BUCKEYE AND GROVER STICKS




6-inch $0.90

8-inch 1.00

10-inch 1.20

12-inch .. .1.40




14-inch $1.60

16-inch 1.80

20-inch 2.20

24-inch . . .2.60



ROUSE JOB STICKS




The Rouse Job Stick is scientific in design
and faultless in construction. Easiest to set to
picas or nonpareils. Measures are practically
perfect. Undoubtedly the best Job Stick made.
Every stick warranted.



2 INCH 2 1-4 INCH 2 1-2 INCH

6-inch $1.75 $1.85 $1.95

8-inch 2.00 2.10 2.20

10-inch .. . . 2.25 2.35 2.45



2 INCH

12-inch $2.50

15-inch . . . 3.00



2 1-4 INCH 2 1-2 INCH

$2.60 $2.70



ALBION STICK




6-inch, steel $1.00

1.10

6 2% inches deep 1.15



1.25

German silver, 2% inches deep 1.50

2j| " " 1.50

2 " ' " 1.75

nickle plated, 2 " " 1.30

" " 2 " " i . 1.45



ELM CITY SINGLE MEASURE NEWS STICK




Price, japanned $1.00

Price, nickled 1 .25

PERFECT NEWS STICK NO. 2




No. 2, steel riveted, 13 or 13j^ ems pica $0.80



STAR COMPOSING STICKS



2 inch .......... Steel, Nickel-plated ........... $2.00 $2.25 $2.75

2^' " .......... " ........... 2.25 2.50 3.00

2 inch .......... Brass ................... ' ....... 2.50 2.75 3.25

2^ " .......... " .......................... 2.75 3.0O 3.50



12 INCH

$3.25
3.50
3.75
4.00



15 INCH

$3.75
4.00



18 INCH

$4.25
4.50



BARNHART BROS. & SPINDLER'S



908



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



WOOD POSTER STICK




With brass-lined ends, iron knee, and screw clamp. Width, inside, two and one half inches. Made of the
bestrseasoned cherry, and fitted with japanned clamp, polished knurl-headed screw and japanned knee.



16-inch $1.00

18-inch 1.05

30-inch 1.10

34-inch 1.20

38-inch.. . 1.30



30-inch $1 .35

32-inch 1.4O

36-inch 1.50

40-inch 1.75

42-inch.. . 1.80




METAL AND BRASS CORNER QUADS

The use of Corner Quads insures a 'better junction of mitered corners by preventing
them from slipping past each other. They are made in both brass and metal, and. sold at
following prices:

Brass Corner Quads, made on both 3 point and 3 point body, in sets of four, per set. . . .$0.20
Metal Corner Quads, made on 3 point, 6 point and 12 point body, in sets of four, per set .15




DURANT COUNTING MACHINES

Are especially adapted for use on printing presses. They
are made entirely of iron, steel and brass. The dials have
large black figures that are easy to read at a distance. They
can easily be re-set to 0, or any number required. A bracket
is furnished with each machine for convenience in securing it
to the feed-board of a press. They are nicely finished, the
cover, lever, dials, springs, etc., being nickle-plated. Circular

No. 1, Counts 10,000 . . . . .$ 8.00

" 2, 100,000 . 10.00

" 3, " 1,000,000 12.00




HART COUNTING MACHINES .

It saves valuable time and paper. Counts to 100,000 and
repeats automatically. Is accurate and durable.- Made in a
thorough manner and guaranteed every way reliable. Circular.
Hart Counter, counts 100,000 $6.00





COUNTERS FOR JOB PRESSES

A good, reliable Counter for the job press at a reasonable price
Every part is first-class and nickle-plated. Gears and dogs are stamped
from steel and case-hardened, making them very durable. Circular^

Size 1% x4i, registering 10,000 ^$3.00

" I%x5 100,000 . . 3.25

Throw-off attachment, each



THE REDINGTON COUNTING MACHINE



The Redington Counting Machine has all the necessary qualifi-
cations for accurate and rapid counting, is durable, neat in appear-
ance, convenient in size and low in price. All parts are made from
sheet steel formed by dies and are, therefore, interchangeable. Sim-
plicity in design, heavy material and large wearing surfaces insure
ease of operation and long life for the counter. All working parts are
enclosed and protected, yet easily accessible as the case opens both
front and back, exposing all mechanism for oiling or inspection. The
counter can be set back to zero without the use of a key or other
device. It can be run at any speed without jumping or loosing count.
Redington Counting Machine, size 3J x34 x2$ inches $5.00




COPY HOLDERS

Rouse, for composing stick ... $0.25



POINT-LINE, POINT-SET, POINT-BODY



909



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



PATENT CUTTING STICK

The Patent Stick consists of a main body-piece (A), made
to fit the groove of your paper cutter. The body-piece has a
groove or recess in it, which holds a small strip (B) , & of an
inch square. This movable strip is the cutting-surface, and
is held in place by a steel clamp (C) , which is drawn up by
the bolts (D) . The Cutting Strips, being square, can be used
on four sides, thus giving the same amount of service as the
large sized sticks heretofore used.

A is the Body-Piece made to fit groove in cutter. B is the Cutting-
Strip on which knife strikes; is i 5 B inch square, and always fits. C is
Steel Clamp which holds the Cutting Strip and prevents warping.
D is the Screw which grips the clamp to the body piece.

How to Order. 1. Give size square the main body-piece
is to be. Be particular on this point, and see that groove in
cutter is accurately measured. 2. Give length of stick.

3. State how far from front edge of stick the knife strikes.

4. State whether knife cuts from right to left or left to
right. In ordering cutting-strips, give the exact length
required. All strips are cut to a standard uniform gauge,
and are sure fit.

Net Price List

Main Body -piece, under 38 inches long $5.0O

Strips, under 38 inches long, per dozen 25

Main Body-piece, 38 to 54 inches long 6.00

Strips, per dozen 40

Main Body -piece, 55 to 70 inches long 7.00

Strips, per dozen 50

Main Body-piece, 71 to 84 inches long 8.00

Strips, per dozen 60




CUTTING STICKS

Cutting Sticks are made of selected Rock Maple, thoroughly
accurate in every respect. They have a smooth velvety finish.

i inch square, per dozen 26 inch, $0.40

'i inch square, per dozen 26 inch,- .70

1 inch square, per dozen 26 inch, 1 .00

li inch square, per dozen 26 inch, 1.10

li inch square, per dozen 26 inch, 1 .25

1| inch square, per dozen 26 inch, 1 .40

U inch round, per dozen 26 inch, 2.10

li inch octagon, per dozen 26 inch, 1.55



dry, and guaranteed to be true and



30 inch, $0.50
30 inch, .85
30 inch,
30 inch,
30 inch,
30 inch,
30 inch,
30 inch,



1.15
1.30
1.45
1.60
2.40
1.80



34 inch, $0.55
34 inch, .95
34 inch,
34 inch,
34 inch,
34 inch,
34 inch,
34 inch,



1.30
1.45
1.65
1.80
2.70
2.05




CHICAGO DRYING RACK

A more economical addition can not be made to a modernly equipped
printing office than a suitable outfit for the proper drying of the printed
sheets. An enormous waste of good material is constantly going on
throughout the printing field, and there are large quantities of smutted
\work being delivered to dissatisfied customers, most of which could be
avoided by the installation and proper handling of a drying outfit.

These Drying Racks are substantially constructed of selected hard-
wood, and the framework is finished in the best Cabinet style. They
have wide bases, which prevent the frames from toppling over under
heavy loads. The Racks are supplied complete with Dryers, and the
Dryers are also sold separately in dozen lots.

List Prices of Chicago Drying Racks















PRICE PER


WEIGHT


NAME OF DRYING
RACK


NUMBER
SHELVES


SIZE
INCHES


PRICE
COMPLETE


WEIGHT
POUNDS


OF RACKS
ONLY


DOZEN
SHELVES
ONLY


PER
DOZEN
POUNDS


Chicago No. 5
Chicago No. 6
Chicago No. 1


12
10
10


24x24
24x36
30x48


$20.25
22.00
32.50


200
225
250


$12.50
14.00
21.00


$7.75
9.60
13.50


95

125
185



BARNHART BROS. & SPINDLER'S



910



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



KOERNER'S PATENT INTERLOCKING DRYING RACK



With these . Racks
sheets are taken direct
from the fly and may be
stacked ceiling high, in a
perfectly straight and
rigid pile, which cannot be
knocked over by accident,
and with no more weight on
the bottom than on the top
sheets. This pile is a most
effective drying room,
occupying only the floor
space of one Rack, and
from the time the sheets
are fed into the machine
until ready for the bindery
they need not be handled.

The Interlocking de-
vice, which makes the pile
straight and rigid, is shown
in the illustration. Each
Rack is firmly locked on its
neighbor, but each slides
with ease on the Rack im-
mediately below it. They
save handling, all the time

of that operation, and the consequent waste of paper through offset, smearing fingermarks and tearing.
In many cases these Racks save expensive slip-sheeting. They save 75 per cent of floor space over any
other method of drying sheets, from one to two per cent of paper, and a vast amount of time. A further
saving of time may be effected by placing the Racks as they come from the fly board on a Wisconsin Printers'
Truck, made specially to take these Racks, (see Printers' Trucks.) Using this Truck saves handling the
Racks you can move a pile of Racks to any point quicker, safer, and easier on the Truck than the single
armful can be moved by hand. The Patent Interlocking Drying Racks are made with hardwood sides,
wide softwood slats, and are very strongly put together.




Interlocking 1 Racks, stacked with Paper, straight and rigid.



Price List, Weights and Dimensions



SIZE INSIDE


WEIGHT EACH


PRICE EACH


SIZE INSIDE


WEIGHT EACH


PRICE EACH


81 x 13 inches. .


li pounds


$0.20


24 x 36 inches


8 pounds


$0.55


11 x 17 inches


3 pounds


.25


32 x 48 inches


12 pounds


.85


13 x 19 inches


3i pounds


.30


38 x 52 inches.


15 pounds


1.20


15 x 21 inches. . .


4 pounds


.35


43 x 63 inches


19 pounds


1.55


18 x 25 inches


5 pounds


.45


45 x 65 inches


20 pounds


1.60















The side rails on Koerner's Racks are 1J inches wide. The slats which support the sheets are | of an inch thick
When stacked, each Rack adds lf e inches to the height. Unless otherwise ordered, the side rails are always made
to run the longest dimension.

The prices given above are for Racks with a clearance of Ii 3 8 inches between, when Racks are stacked. For a
clearance of 24 inches add 25 per cent to above prices, and for a clearance of 3 inches add 35 per cent to the above prices



NEW YORK DRYING RACK

A suitable Drying Rack is a necessity in every economically
managed printing office. It will improve the quality of the pro-
duct, and facilitates the handling of the printed sheets.

The New York Dryers are removable and can be transferred
to the press in order to take the sheets direct from the fly. Thus
undue handling, which means an excess of spoilage, is avoided.
The use of these Dryers prevents undue stacking of the freshly
printed sheets, and also expensive slip sheeting is reduced to a
minimum. The rightful use of a good set of Dryers will prevent
much of the smutting commonly experienced.





SHELVES IN EACH RACK


Ulfc


fc *"




z <2


K LU <0


RACK


NUMBER


SIZE


*


si i i

X *


= 5

a. 2 O


" 1


!i




SHELVES


INCHES




0*0.






5 2


New York No. 1
New York No. 2


20
30


24x36
24x36


$22.75
32.00


225
300


$12.00
15.75


$6.50
6.50


80
80


New York No. 3


20


28x42


28.75


250


12.75


9.60


105


New York No. 4


30


28x42


40.50


350


16.50


9.60


105




POINT-LINE, POINT -SET, POINT-BODY



911



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



PRINTERS' DIVIDERS

Useful for laying out paper, setting gauges, and imposing plate forms.
Price ... $0.85




EMBOSSING COMPOUND



B. B. & S $0.50

Burbank's . . .75



Michener's $1.00

Peters' . . .75



ELECTRIC MOTORS

We can supply Electric Motors on short notice. Full information, prices, terms, etc., on application.

ELECTROTYPING

We carry a very complete line of stock cuts, and on short notice can furnish duplicates of any cuts
shown in our electrotype catalogue.

We make a specialty of reproductions of half-tone engravings, the printing from our electros being
practically as good as from the original.

ENGINES

We can supply gas or gasoline engines on short notice and at manufacturers' prices. Full information,
prices, terms, etc., on application.



ENGRAVERS' TOOLS



No. 1. V shape, large, sharp edge
No. 2. V shape, small, sharp edge
No. 3. Flat, face 84-inch wide




No. 4. Flat, face i-inch wide
No. 5. Oval, face gVinch wide
No. 6. Diamond, 3 Vmch square



Engraving Tools, set of six, sharpened ready for use $2.50

ENGRAVERS' WOOD

BOXWOOD In four grades, blocks made any size desired. Stock is usually made about 12x12 inches,
2-cent, 3-cent, 4-cent, and 5-cent, per square inch, according to quality. Boxwood blocks weigh approxi-
mately 4} pounds per square foot.

American Boxwood, per square inch, blocks made any size desired $0.02

Maple Blocks, per square inch, blocks made any size desired 01

An additional charge of 25 per cent, is made for furnishing Maple blocks dressed on both sides.



EYE SHADES

Eye shades, each $0.15

Eye shades, per dozen 1 .50



TRIUMPH EYELET PUNCH AND SET

An indispensable tool in the printing office. Punches the hole and sets the eyelet. Takes only one
size eyelet (No. 2 Skirt).

Price, complete $2.00

Eyelets, per box of 1,000 50

Eyelets, per box of 500 25




BARNHART BROS. & SPINDLER'S



912



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



SECTIONAL CHASE AND FORM RACK




The Sectional Chase and Form Rack is a new
article for press room and composing room re-
quirements, and provides a suitable holder for
chases and locked forms at a very moderate
price. In the press room the Sectional Chase
and Form Rack can be put in position conven-
ient to presses and forms when received from
the composing room, ready for the press can be
temporarily placed in this rack until required
for printing. In the composing room the use of
the Sectional Chase and Form Rack will clear
up the office, allow more stone room and mini-
mize the danger of pied forms. The Sectional




Chase and Form Rack is made in two sections
and sold in sets consisting of two sections "A"
and one section "B." One each of sections
"A" and "B" is screwed to the floor and one
section "A" to the wall. A set arranged thus
accomodates six chases or forms. If provision
for more chases or forms is required other sets
can be added, as the sections are designed to
work in multiples. Made of cast iron, strongly
re-inforced to withstand any amount of hard

usage. The Sectional Chase and Form Rack represents the newest device for economically placing

chases and forms.

Set, consisting of two of Section U A" and one of Section " B '' $3.75

Single Section '"A," each !- 25

Single Section "B," each 2 - 50

HAMILTON FORM TRUCK

A most convenient article to have around a printing office.
It can be used to advantage trucking forms back and forth be-
tween the composing room and the press room, without danger
of accident. It will take two forms, one on each side, up to 34x48
inches, or several small forms, without overlapping the edge of
form beds. It is made of hardwood throughout, re-inforced by
cleats underneath, and mounted on four double-wheeled swivel
castors. Diameter of wheels is 3f inches. This insures easy
motion. The Truck can be turned around and reversed within
the floor space it occupies. The bottoms of the grooves where
the chases rest on the Truck are lined with iron. Length, 48
inches; extreme height from the floor, 39i inches; extreme width,
42 inches; size of the sloping form beds, 34 inches high, 48 inches long. Weight, crated, ready for ship-
ment, 300 pounds. Other sizes of this truck can be made to order at proportionate prices.

Hamilton Form Truck . . ... $48.00




POINT-LINE, POINT-SET, POINT-BODY



913



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



FEED FOLDERS

Bone feed folders, each ... $0.25

Bone feed folders, per dozen 2.50

FOLDING MACHINES

We are manufacturers' agents for all the leading makes of folders, and are prepared to make quotations
on any style desired. Descriptive circulars, prices, terms, etc., on application.

FOOT SLUGS

SINGLE COL. DOUBLE COL.

Brass, 12 point, cut to newspaper measure, each $0.15 $0.25

Brass, 18 point, cut to newspaper measure, each 20 ..30

Brass, 24 point, cut to newspaper measure, each 25 .35

Metal, 12 point, cut to newspaper measure, each 04 .06

Metal, 18 point, cut to newspaper measure, each 05 .07

Metal, 24 point, cut to newspaper measure, each 06 .08

PATENT STEEL FURNITURE



*

m &M



Style No. 1 24-point steel with one 12-point notch




Style No. 3 36-point steel with one 18-point notch




Style No. 4 48-point steel with three 12-point notches




Style No. 5 54-point steel with two 18-point notches



Patent Steel Furniture is a well tried and useful
device for saving time in making up and locking up
printing forms. It consists of pieces of steel in ac~
curate lengths with notched ends, which can be quickly
thrown around blank spaces, instead of filling them in
the ordinary way with wood or metal furniture. As
it takes less material to go around a space than to fill it,
so it takes less time to do it. The larger the space the
greater the saving both time and material. It pays for
itself over and over again in the time and trouble it
saves and the accuracy it secures over the ordinary
material.

For color and blank work there is nothing in use
that can compare with it. Weight for weight it goes
six times as far in filling space as metal furniture, and
can be used in from one-half to one-sixth the time.
It is accurate in every way, to the one-thousandth of
an inch. It is not only practically perfect when new,
but being made of steel it is always accurate. It is
made of 24, 36 and 54 point steel % of an inch high, and
with either 12 or 18 point notches.



Font A The lengths from 8 to 42 are of 24 point steel, with 12 point notch, namely : 8, 10, 12, 14, 16, 18,
20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40 and 42 picas. The lengths from 45 to 72 are of 36 point
steel, with two 12 point notches, namely, 45, 48, 51, 54, 57, 60, 63, 66, 69, and 72 picas. Total

28 different lengths, eight pieces of each, 224 in all $54.00

Font B Has half the quantity of Font A. 112 pieces in all 27.00

Font C Is the 24 point stock only of Font A, 8 pieces each, 8 to 42 ems, 144 pieces in all 29.00

Font D Has half the quantity of Font C. 72 pieces in all 14.50

Font E Is the 36 point stock of Font A, 8 pieces each, 45 to 72 ems, 80 pieces in all 25.00

Font F Has half the quantity of Font E. 40 pieces in all 12.50

Font G Is made entirely of 36 point steel, with one 18 point notch, as per Style Number Three, and
runs in length from 9 to 72 picas, varying by 3 picas, namely: 9, 12, 15, 18, 21, 24, 27, 30, 33, 36,

39, 42, 45, 48, 51, 54, 57, 60, 63, 66, 69, 72 picas. Total 22 lengths, 8 pieces each, 176 in all 44.00

Font H Has half the quantity of Font G, 88 pieces in all 22.00

Font I Is made of 54 point steel, with two 18 point notches as per Style Number Four, the lengths
being 15, 18, 21 and 24 picas, there being four outside pieces and two cross bars for each
length, or 24 pieces in all. The outside pieces are notched to receive the cross bars, which

are halved together 21.00

Font J The lengths from 6 to 30 are of 24 point steel, with 12 point notch, namely : 6, 8, 10, 12, 14, 16,
18, 20, 22, 24, 26, 28 and 30 picas. From 33 to 60 it is 36 point steel, with two 12 point notches,
namely: 33, 36, 39, 42, 45, 48, 51, 54, 57 and 60 picas. From 63 to 72 it is 48 point steel, with three
12 point notches, namely : 63, 66, 69 and 72 picas. Total 27 different lengths, 8 pieces of each,
216 in all.. 58.00



BARNHART BROS. & SPINDLER'S



914



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



IMPROVED METAL FURNITURE

Our Labor-Saving Improved Metal Furniture is
light, strong and accurate. It has no unnecessary
metal. Put up in fonts containing the following
sizes: 2, 3, 4, 5, 6, 8, and 10 ems pica in width, and 4, 5,
6, 8, 10, 15, 20 and 25 ems pica in length, finished to
point system. The 50 and 100 pound fonts contain in
addition to the above, 30 and 50 em pica lengths in 2,
3, 4 and 5 em pica widths. We also furnish pieces 30,
40 and 50 ems pica long, in 2 to 10 em widths, on
special order.

12 Ib. font $ 3.00

24 Ib. font 6.00

50 Ib. font 12.50

100 Ib. font 25.00

Sorts, per pound 25





RAILROAD FURNITURE



Railroad Furniture is made 2, 3, 4, 5, 6, 8 and 10 ems
pica wide by 17 inches long. Any length cut to order at
25 cents per pound.

12 Ib. font $ 3.00

24 Ib. font 6.00

50 Ib. font 12.50

100 Ib. font 25.00

Sorts per pound 25



QUOTATION FURNITURE

Put up in fonts containing the following sizes: 2, 3 and 4 ems pica in width, and 4, 8, 12, 16 and 20 ems
pica in length. Upon special order we furnish lengths from 20 to 80 ems pica, graduated by 4 ems pica.

5 Ib. font $ 1.25

12 Ib. font 3.00

24 Ib. font 6.00

50 Ib. font 12.50

100 Ib. font 25.00



Online Librarybros. & Spindler BarnhartBook of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 → online text (page 57 of 71)