bros. & Spindler Barnhart.

Book of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 online

. (page 65 of 71)
Online Librarybros. & Spindler BarnhartBook of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 → online text (page 65 of 71)
Font size
QR-code for this ebook


ished in Japan and gilt striped. Punch heads and all small parts are nickel-plated. Shipping weight of
machine with two heads, 13 pounds. Weight of single hole heads, 4 ounces each. This machine will never
wear out and cannot get out of order. Circular.

Unimatic Punch No. 2 including any two round hole punch heads of the following sizes: \", iV, 3 y,

i" or A" ... . . $7.50






UNIMATIC PUNCH No. 3

Unimatic No. 3 is a larger size on the No. 2 principle. It is
made like and contains all the parts and characteristics of the
No. 2, but on a larger scale. Punches holes any distance apart
up to 14$ inches. Shipping weight of machine with two heads
20 pounds. Takes same heads as the No. 2 machine.

Unimatic Punch No. 3 including two round hole punch

heads of the following sizes: J", iV, uV or T V' $15.00



Some of the Shapes Punched by this Machine Actual Size




J"U



ft Tt




15U



Styles of Unimatic Punch Heads



13 U



11U



Style U




Style U. for punching holes for Post Binders, Price Books, Shan-
non Files, etc. Single round hole punch heads, i", &", 5 y, i"
or iV $1.25

Style DU. Double round hole punch heads for S. & T. Price Book

and Tengwall Files, &", is", az", i", not over 1" apart 2.00

Style CU gives 5 changes of size for each head. Two heads are
adjustable any distance apart. Combination head, com-
prising 5 round hole punches as follows: |", T 3 8 ", V', i" and i" 3.00

Style 11U for punching slotted hole to fit Rockwell and Ruppell

Card Index 7.50

Style US for punching Loose-Leaf Ledger Sheets. Single round

hole punch heads, slotted, I" or Ji" 5.00

Style 13U for punching slotted hole to fit Globe Card Index 7.50




Style 11 U




Style DEL
POINT-LINE. POINT-SET, POINT-BODY



967



Style 13U
QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



STERLING ROUND CORNERING MACHINE

In the Sterling Round Cornering Machine printers will find the most useful and
comprehensive machine yet offered to the trade. Its thorough construction and
simplicity of operation, together with the amount and high quality of work it is cap-
able of doing, makes it without an equal. The machine is self-clamping and very
rapid. Every part is made with the utmost care. It is the most popular machine
for the purpose ever devised and over 5,000 of them have already been sold. The
operation is so simple that any boy can round corner 1,000 cards in a few moments
with hardly any cost. Booklets, Calendars, Menus and an endless variety of work,
usually turned away or farmed out, can now be taken at a
good profit. The Sterling is like the "Elastic Book Case"
always complete but never finished.

Perforating Attachment

The Perforating Attachment which we here illustrate
can be added to any Sterling and will prove a great conven-
ience. The system of gauges is the finest ever devised and
they can be instantly adjusted for handling any partic-
ular size or shape of work, and
are so constructed that adjust-
ments can be made to the hun-
dredth part of an inch. When
you add this attachment to a
Sterling you will have the best
Perforating Attachment 10-inch Perforator on the market .






Punching- Attachment



Punching Attachment

The Punching Attachment will be found very
useful and profitable for punching round holes in
cards, paper, etc. The fast operation and capa-
city of the machine makes it desirable for the
printer to have this attachment, owing to the
large demand for loose sheets in the modern fil-
ing systems.

Stabbing Attachment

Every printer finds it necessary now and
then to do a job of bookbinding. With this at-
tachment a printer can do a very successful job
on check books, etc., or where he would not
have work enough to warrant the installing of a
wire stitcher, which are very expensive; and
even the large printer and book binder finds it a
very useful attachment owing to its powerful
and quick working properties.



Pedestal Foot Power Attachment

We illustrate the Pedestal Foot Power Attachment on which a Sterling can
be mounted in a few minutes, allowing the operator to sit down when using the
machine, leaving both hands free for guiding the stock. It will be appreciated
by every owner of a Sterling.



PRICE LIST OF MACHINE AND ATTACHMENTS



Round Cornering Machine, with one knife

Pedestal Attachment

Treadle Attachment, additional

Punching Attachment, additional

Perforating Attachment

Stabbing Attachment, additional

Cutting Blocks, per dozen

Extra Corner Knives, each

Extra Punch and Die, 3 3 2 , i, 3 5 Z , is, as, i< & T S C. JJ, I. each
Thumb-Hole Indexing Attachment, additional . . .
Eyelet Attachment, Style P, about & inch . :$2.00
Eyelet Attachment, Style R, about i inch . . 2.00
Eyelet Attachment, Style S, about I inch . . 2.00

Loose Leaf Punching Attachment

Card Index Punch Head. . .



B. P. Eyelets, per 1000..

D. D. R.

E. S.



NOTE The Eyelet Attachment is used on the Punching Attachment. It cannot
plied to the Bound Corner Machine alone. Eyelets packed in boxes containing 5000.



$15.00

15.00

10.00

10.00

18.00

5.00

.35

1.25

2.00

10.00

.25

.50

.55

12.00

7.00

be ap-



Round Cornering Machine





Pedestal Foot Power
Attachment



BARNHART BROS. & SPINDLER'S



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS




MONITOR MULTIPLEX POWER PUNCHING MACHINE

This machine is 30 inches wide and is furnished with six standard
round hole punches, dies and blocks complete, as shown in cut. The
position of the punch and die can be changed instantly by moving a lever
on side of machine to a perpendicular position. This head will punch paper
3i inches from center of hole to edge of paper. We also furnish separate
punch and die blocks for punching holes any distance from edge of paper
if desired. The frame is very heavy, solid and substantial. The material
is of the best and finish superb. Circular.

Including 6 Round Hole Punches $250.00

Extra Punch and Die, for Round Holes 2.50

Combined Punch and Die Head, for Round Holes 7.50

Special Loose Leaf Punches and Dies, standard sizes 12.50

Card Index Cutting Attachment 1 10.00

Motor and Attachment by Gear, complete, 110 and 220 Volts 100.00

Speed Regulator, extra 10.00

THE PRINTERS PUNCH

The Printers Punch is a substantial and first class machine and
offered at a moderate price. The punches are constructed without any
springs and move straight up and down, avoiding the friction and wear
caused by any but a direct up and down movement, thus making it the
most durable and economical of all punches. Circular.

No. 2, hand power $ 22.00

No. 7, foot power, without stand 50.00

No. 8, foot power, without stand 65.00

No. 7, foot power, with iron stand 75.00

No. 8, foot power, with iron stand 90.00

No. 9, steam power 1 15.00

No. 10, steam power 130.00

No. 2 will punch holes up to 8i inches from center to center; Nos. 7 and 9,
11 inches and Nos. 8 and 10, 18 inches. Prices given above include two round
punches with each machine.

MONITOR DUPLEX POWER PUNCHING AND ROUND
CORNER CUTTING MACHINE

For offices whose requirements for punching of paper do not necessitate the
use of such an elaborate machine as Latham's Monitor Multiplex Power Punch-
ing Machine, we herewith present a less costly machine operated by power,
which will punch paper of same thickness and as quickly as the Multiplex, and it
can also be used as a power round corner cutting machine, covering the use of
two separate machines and saving space and power at practically one-half the
investment. This machine is furnished with combined punch and die blocks that
will punch holes 34 inches from edge of paper, and paper of any width, as there
are ho obstructions on sides of the machine. Maximum distance between center
of holes that can be punched, 14 inches; minimum, H inches. Combined punch
and die blocks will allow for punching holes 34 inches from edge of paper, and
will punch through * inch in thickness. Three round corner cutting knives are
furnished with corner cutting attachment. Circular.

Complete with two punches and dies, without round corner attachment. .$140.00

Round corner attachments, extra 25.00

Extra punch and die blocks, each 5.00

Extra round hole punches and dies, per set, upper and lower die 2.50

Special punch and die and block for loose leaf ledger standard sizes, each 12.50
Extra round corner cutting knives, each 1.50





BULLOCK PRESS PUNCH



One or more may be locked in a type form and will
round hole 3 3 2 , i, ft, or J inch, in paper or card stock, the sz



cut a clean,

__, paper or card stock, the same time the

job is printed. This punch will not clog, as each piece cut is automat-
ically ejected by the plunger as soon as the impression is released, and
falls on the floor. The ejector also protects the rollers from any dan-
ger of injury from the cutter. All parts being interchangeable, new
cutters can be readily fitted in case of accident. The spring for con-
trolling the ejector can also be made stronger by turning screw at
the bottom. Circular.

s 3 i, J, ft or i inch, on bases T 7 8 inch square, each $0.75 Extra Cutters .

W,, inch, on bases , 9 e inch square, each 1.25 Extra Cutters.




.$0.35
.60



POINT-LINE, POINT-SET, POINT-BODY



969



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS





IMPROVED HEMPEL QUOINS

No. 1. Small, per dozen $2.50

No. 2. Large, per dozen 3.00

Keys, each 50



HEMPEL QUOINS AND KEYS

No. 1. Challenge Hempel Quoins, per dozen $1.00

No. 2. Challenge Hempel Quoins, per dozen 1.50

B. B. & S. Key, either size, plain 50

B. B. & S. Key, either size, nickeled 75

Pressman's Combination Quoin Key, plain 1 .00

Pressman's Combination Quoin Key, nickeled 1.15

Right Angle Quoin Key, Style D, either size, plain 75

Right Angle Quoin Key, Style D, either size, nickeled 90

ROUSE REGISTER QUOINS

By using Rouse Register Quoins, mounted plates or pages may be registered
independently just as unmounted plates are registered with hooks. The quoins are
placed on all four sides of the blocks and any page may then be moved in any direc-
tion without disturbing the other pages.

No. 1. Margin 16 to 24 points, per doz $2.00

No. 2. Margin 36 to 48 points, per doz 2.00

Key for either style 15

UNION LOCKABLE QUOIN

An exact duplicate of the original Hempel
Quoin, with three notches cut in the central
rib for the purpose of using the quoin in con-
nection with the Brower Lock. Circular.

No. 1. Small, per dozen $2.50

No. 2. Large, per dozen 3.00

Kevs. each. . .50



MIDGET SAFETY QUOIN

The Midget Safety Quoin

is locked by a tap of the

mallet, and occupies no

more space in length when

locked than when unlocked.

Can be used in a space 18
points wide by 120 points long, either outside or inside a form. It is absolutely safe, as when locked
against its corresponding flat surfaces, and the harder the surface it bears against the better. Ci'j
Price, per dozen, with key. net







it rests
ciiliir.
. ..$2.00




WOOD QUOINS



Hickory
Boxwood


BOXES OF 100

$0.40.. ..
60 .


OF 500

..$1.80..
.. 2.70..


....$3.50
. . . . 5.25


Lignumvita>
Hickory, in barrels contaii


80....
liner about 7,500 . . .


.. 3.60..


7.00
. . $3.25



Boxwood, in barrels containing about 7,500 5.00

PECK QUOIN LOCK

A simple, practical and inexpensive device to prevent quoins from working loose while the press is
running. Useful where close register is desired, where the press is run at high speed or for long runs.

No. 1, for small quoins, per 100 $1 .50

No. 2. for large quoins, per 100 '. 2.0O



BAR1SIHART BROS. & SPINDLER'S



970



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS




THE MORTON LOCKUP

Direct Spread No Slide No Spring of Form





An Iron Side-Stick, with broad bearing, (true and square), attached to the best machine-
finished steel Quoins. The quickest, safest and most complete Lock-up in use all in one piece.
Place directly against the type, furniture or chase, as most convenient : give the key a half -turn,
and the work is done. No time wasted, no skew, and no quoin can drop out. By this method
of imposition, all looseness, bowing or springing of the form is impossible.



3-inch, 1 Quoin $0.40

34-inch, 1 Quoin 40

3-inch, 1 Quoin 40

4-inch, 1 Quoin 40

5-inch, 1 Quoin 40

6-inch, 2 Quoins 70

6s inch, 2 Quoins 70

7-inch, 2 Quoins 70

8-inch, 2 Quoins 75

9-inch, 2 Quoins 75

10-inch, 2 Quoins 80

12-inch, 3 Quoins 1.10

13-inch, 3 Quoins 1.15

14-inch, 3 Quoins 1.20

15-inch, 3 Quoins 1.25

18-inch, 3 Quoins 1 .75

20-inch, 4 Quoins 2.50

22i-inch, 4 Quoins 3.00

Key, plain 50




Wickersham Quoin



THE WICKERSHAM QUOIN

The only Quoin which locks by a direct spread, without any slide, against straight or beveled
furniture: can't slip; absolutely safe. No. 1 is f-inch wide: No. 2 is 2-inch wide; expands 14 points.

Quoins, per dozen $2.50

Keys, each 50



SLAUSON CYLINDER PRESS LOCKS

The Slauson Cylinder Press Locks are made of flat drawn steel tubes which telescope one
into another and are drawn out to fill a given space and then locked by an ordinary Hemple
key. The quoin which is in the form of a coil or snail, has an extension of two picas and is
absolutely safe. The parts are dropped steel forgings. The chief value is on the beds of
cylinder presses where forms are being locked that are smaller than the beds. They are
almost as quick as a flash and they hold a form solid to the bed. taking out the spring of a
chase and preventing the working up of material inside. Pressmen ap-
preciate them for this value even more than for the time they save. With
these locks the press clamps are not used for locking the form but are
tightened at the start. The chase is squared against the clamps and the
locks "do the rest." They work equally well behind the chase or between
chase and bearers. Another good use is inside cylinder chases where
otherwise a lot of wood furniture would be used. For example a long,
narrow heading can be locked in a full-sized chase, a wide strip of furni-
ture intervening or a steel bar. In this use foot piece of the lock comes
against the form. In all cases quoin end comes against the chase. Circular.

3 inches when shut, opening to 5 inches, per pair $4.00

5 inches when shut, opening to 8 inches, per pair 4.00

8 inches when shut, opening to 14 inches, per pair 5.00

14 inches when shut, opening to 26 inches, per pair 1 . 6.00 Closed

Wall Pocket for holding a set, 50 cents. Longer lengths up to 36 inches made to order.





Open



POINT-LINE, POINT-SET, POINT-BODY



971



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



PROOF AND HAND-PRESS ROLLERS






NUMBER


FRAME WITH


COMPLETE


EXTRA






HANDLES


STOCK


WITH COMP.


STOCK




6-inch


1-


$1.25


$1.85


$0.40


14-inch


8-inch


.... 1


1.50


2.30


.45


16-inch


10-inch


1


1.75


2.75


.50


18-inch


12-inch . .


..1


2.00


3.20


.60


20-inch




STOCK

$2.25
2.50
2.75
3.00



WITH COMP. STOCK

$3.65 $0.70

4.10 .75

4.55 .80

5.00 .85



PRICES FOR CASTING GORDON-PRESS ROLLERS



8 x 12 $0.40

9 x 13 45

10x15 .80

11x17... .85



12 x 18 $1.00

13 x!9 1.00

14 x20 1.10

14i x22... . 1.25



Hand-press rollers cast at 10 cents per inch. Cylinder-press rollers cast at 35 and 50 cents per pound.



ROLLER COMPOSITION

Bingham's Standard, per pound $0 35 Bingham's Durable, per pound



.$0.50



ROLLER CLOTH-Felt for Distributors

I

In rolls of 2i inches wide and 12 yards long, per roll $5.00

The same, per yard 50



ROLLER CORES

For Gordon Job Presses

8 x 12 and smaller $0.35

9x13 and 10 x!5 .45

11 x 17 to 14i x 22 60

For Hand Rollers



6-inch $0.40

8-inch 45

10-inch .50

12-inch . . .60



14-inch $0.70

16-inch 75

18-inch 80

20-inch . . .85



BARNHART'S STEEL ROLLER BEARERS

For 5x8 chase, per pair $0.35

For 6i x 10 chase, per pair 40

For 7x11 chase, per pair 40

For 8x12 chase, per pair 45

For 9 x 13 chase, per pair 50

For 10 x 15 chase, per pair 50

For 11 x 17 chase, per pair 60

For 12 x 18 chase, per pair 75

For 13 x 19 chase, per pair 75

For 14 x 20 chase, per pair 90

For 14i x 22 chase, per pair 90




RULING MACHINES

Catalogues and prices furnished on application.



BARNHART BROS. & SPINDLER'S



972



SUPERIOR COPPER-MIXED TYPE



PRINTERS' FURNITURE AND TOOLS



THE MILLER SAW-TRIMMER

Universal Type

With Standard Equipment, without counter-shaft or motor $300.00

Extra for Counter-shaft mounted on machine base, including

belt to saw arbor 25.00

The Standard Equipment furnished with the Miller "Universal" Saw-
Trimmer includes two 6-inch linotype saws and heads complete with trimmers,
one 50-pica swivel gauge, one micrometer point end gauge, one 5-point line
holder, one mitre vise, one removable work-holding vise, one batter with
locking bolt, one saw hood with bolt and nut, one point elevating dial, one
elevating crank, one belt tightener, one saw swage, one 4x% inch flat emery
wheel,

Special Attachments for Universal Type

Beveler head for tacks $ 10.00

Beveler head for register hook ." . . . 10.00

Router and Jig Saw attachment complete with all tools 200.00

MILLER SAW-TRIMMER

Special-Purpose Type

With Standard Equipment, without countershaft or motor $200.00

With Countershaft mounted on base of machine, with endless

belt to saw arbor, extra 25.00

The Standard Equipment furnished with the Miller "Special-Purpose"
Saw-Trimmer includes two 5-inch linotype saws and heads with trimmers,
one 50-pica swivel gauge, one micrometer point end gauge, one 5-point line
holder, one mitre vise, one removable work-holding vise, one batter with
locking bolt, one saw hood with bolt and nut, one 4-inch flat emery wheel,
one saw swage, one belt tightener.




Universal Type



Special Attachments for Universal or Special -Purpose Type

Furnished only on order, and at the prices listed below:

150-pica extension micrometer point end gauge $25.00

Brass saw and head with trimmers 20.00

Brass saw grinding attachment with 5-inch dish emery wheel 10.00

10-point line holder 5.00

18-point line holder 5.00

12-point vise attachment 10.00

PRINTER'S SAW TABLE

This is the regular saw table for printer's use. It is designed for cut-
ting and trimming cuts, wood or metal furniture, reglets, slugs, brass rule,
leads, etc. Accurate squaring up and parallel gauges are furnished. The
table on the right hand side extends outward, and that side is fitted in as
a shootboard and plane. The table is raised and lowered by a hand wheel
under the front edge of the
table, as shown in the illus-
tration. A shelf attached to
the pedestal provides a handy
receptacle for tools. Slug
cutting attachments can be
had for use with this table,
making it in effect a linotype
Mr-saw. The slug cutting at-

Br_ tachments may be used on any Saw Table having an adequate parallel
^T gauge. They can be used for trimming to size all such material as leads,
slugs, reglet and furniture, and are accurate and reliable. Circular.

Without Shoot Board and Plane, top 24 x 27 inches, with Countershaft on machine $100.00

Without Shoot Board and Plane, top 24 x 27 inches, with connected i H. P. 230 volt motor 170.00

With Shoot Board and Squaring Plane, top 24 x 30 inches with Countershaft on machine 118.00

With Shoot Board and Squaring Plane, top 24 x 30 inches, with connected i H. P. 230 volt motor 190.00

One saw for either metal or wood furnished with each machine.

Slug Cutting Attachment No. 1 18.00

Slug Cutting Attachment No. 2 30.00

Slug Cutting Attachment No. 3 60.00





BACK SAW

Back Saw, for cutting wood or soft metal



.$1.25





HACK SAW

8-inch frame, complete with 1 dozen Griffin blades. . . .$1.50
Extra blades, per dozen 1 .00



POINT-LINE, POINT-SET, POINT-BODY



973



QUALITY AND FINISH UNEQUALED



PRINTERS' FURNITURE AND TOOLS



SCREW-DRIVERS



Each



.$0.75



SCREW-WRENCHES

8-inch, each . . . . .$0.75 10-inch, each



.$1.00



SHOOTING STICKS

"The Correct,'' wrought-steel, nickel-plated, small, each... $0.60
'The Correct," wrought-steel. nickel-plated, large, each. . . .75



HICKORY SHOOTING STICKS

Price, hickory each, $0.08 Per doz., $0.85



PATENT COPPER AND BRASS THIN SPACES

One of the handiest things a printer can have is a full assortment of Patent Copper and Brass Thin
Spaces. To use them once is to appreciate them. They are made in two thicknesses, one-half and one-
point, and are cut upon order for any point body. The half-point spaces are made of copper and the one-
point of brass, so that different thicknesses may be distinguished at a glance. They are accurately cut by
machinery; are cheap, never break, and never wear out. These spaces are put up in fonts of different
assortments as follows:




Wooden Case contains 10 oz. of one-half and one-
point thin spaces assorted In sizes from 6 to 752 point.



Cardboard Box, contains 10 oz. of one-half and one-point thin
spaces assorted In sizes, 12, 18. 24, 36 and 48 point.



Font No. 1, containing 16 oz. of One-Half Point Copper Thin Spaces, cut the following sizes: 6, 8, 10,

12, 14, 16, 18, 20, 24, 30, 36, 42, 48, 60, 72 point. Put up in neat wooden case $1.75

Font No. 2, containing 16 oz. of One-Point Brass Thin Spaces, cut the following sizes : 6, 8, 10, 12, 14,

16, 18, 20, 24, 30, 36, 42, 48, 60, 72 point. Put up in neat wooden case 1.75

Font No. 3, containing 16 oz. of One-Half Point Copper and One-Point Brass Thin Spaces, cut the

following sizes: 6, 8, 10, 12, 14, 16, 18, 20, 24. 30, 36, 42, 48, 60, 72 point. Put up in neat wooden box. . . 1.75

Font No. 4, containing 10 oz. of One-Half Point Copper Thin Spaces, cut the following sizes: 12, 18,

24, 36, and 48 point. Put up in cardboard box 1 .00

Font No. 5, containing 10 oz. of One-Point Brass Thin Spaces, cut the following sizes: 12, 18, 24, 36,

and 48 point. Put up in cardboard box 1.00

Font No. 6, containing 10 oz. of One-Half Point Copper and One-Point Brass Thin Spaces, cut the fol-
lowing sizes: 12, 18, 24, 36 and 48 point. Put up in cardboard box 1.00

Ounce and Pound Prices

We cut upon special order any point body, from smallest to largest size and furnish same in 2-ounce
packages of either the one-half point copper or one-point brass or 2 ounces of copper and brass assorted at
a price of $0.25 per package of any one size. Also sold by the pound as follows: 5 point, $2.50; 5i point.
$2.25; 6 point, $2.00; 7 point, $1.85; 8 point, $1.75; 9 point, $1.65; 10 point, $1.55; 11 point. $1.45; 12 to 16
point, $1.40; 18 to 30 point, $1.35; 36 point and larger, $1.30. A pound may contain either brass or copper
or both.

PLATE MOUNTS

These mounts will be found inval-
uable at make-up table, as supports to
the thin plates cast from Advertiser's
Matrices. By use of these mounts, the
time and waste of metal by melting,
incident to making thin plates type-
high before the make-up can handle
them, is saved. Cast from hard metal,
shaved accurately to required height,

cut from one inch to full column length, varying by i inch steps as desired ; 13 ems or 36i ems wide.

When ordering, send sample of thin plate so height of mount can be made correct.

Single or double column, in any length up to 20 inches, per pound $0.25





BARNHART BROS. & SPINDLER'S



974



SUPERIOR COPPER-MIXED TYPE



PRINTERSTFURNITURE AND TOOLS




Metal Sectional Blocks are jnade from extra hard
metal, cored on their under sides to lighten them. They
are sufficiently heavy for the most exacting impression
of half-tone or tint plate.

The most economical bases for plates of all kinds.
They hold the plates securely and save one-half the time
of make-ready. Save plates from injury because they do
not bend or warp them. As easy to make-up as metal
furniture, and are as necessary to a pressroom as the
modern cylinder press.
Sizes, 16 x 16, 8 x 16, 8x8, 4x8, 2x8, 2 x 6, 2 x 4,

1 x 8, 1 x 6 and 1x4 ems, per pound $0.25



CAST IRON SECTIONAL BLOCKS



16 x 32 ems, each $ 1 .00

16 x 24 ems, each 85

16 x 16 ems, each 60

8 x 32 ems, each 80

8 x 24 ems, each 60

8 x 16 ems, each 35

8x8 ems, each 20

6x24 ems, each. . .40



6 x 16 ems, each $0.30

6x 8 ems, each 18

6x6 ems, each 15

4 x 24 ems, each 40

4 x 16 ems, each 25

4x8 ems, each 15

4x 6 ems, each 15

4x4 ems, each . . .10



STEEL SECTIONAL BLOCKS

The Lightest and Most Rigid Sectional Block Made

Steel Sections may be considered as the basis of the expansion system of print-



Online Librarybros. & Spindler BarnhartBook of type specimens. Comprising a large variety of superior copper-mixed types, rules, borders, galleys, printing presses, electric-welded chases, paper and card cutters, wood goods, book binding machinery etc., together with valuable information to the craft. Specimen book no.9 → online text (page 65 of 71)